Product ID:HEAT RESISTANT ALUMINUM
MSDS Date:04/14/1987
FSC:8010
NIIN:00-815-2692
MSDS Number: BHDWP

EVERSEAL MFG CO INC

475 BROAD AVE
RIDGEFIELD, NJ 07657-2329
US

Emergency Phone: 201-943-4986

Info Phone: 201-943-4986 / FAX 201-943-1123

Preparer: FRANK PRIMERANO

Cage: 72988

EVERSEAL MFG CO INC

RIDGEFIELD, NJ 07657-2329 US

Telephone: 201-943-4986

Cage: 72988

RESIN

Fraction By Weight: 17%

OSHA PEL NA

ACGIH TLV: NA

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 23%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

MINERAL SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 25%

ALIPHATIC NAPHTHA

CAS: 64742-89-8

Fraction By Weight: 31%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:INHALATION-DIZZINESS,NAUSEA,POSSIBLE
UNCONSCIOUSNESS.MILDLY IRRITATING TO SKIN. IRRITATING TO EYES.

First Aid:INHALATION-REMOVE TO FRESH AIR,APPLY ARTIFICIAL RESPIRATION
IF NECESSARY.SKIN-WASH W/SOAP & WATER.EYES-FLUSH W/WATER.CONSULT
PHYSICIAN.

Flash Point:50F 10C
Upper Limits:0.7
Extinguishing Media:FOAM, CARBON DIOXIDE CO2, DRY CHEMICAL
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING
MEDIUM.FIREFIGHTERS SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS.

Spill Release Procedures:ENSURE ADEQUATE VENTILATION,REMOVE IGNITION
SOURCES.ABSORB SMALL SPILLS ON DRY ABSORPTION MATERIAL.USE
SPARK-PROOF SCOOP FOR LARGER SPILLS.

Handling and Storage Precautions:KEEP AWAY FROM MOISTURE.AVOID
EXCESSIVE HEAT.KEEP AWAY FROM IGNITION SOURCES.
Other Precautions:NPCA/HMIS RATING 3,3,O,H.

Respiratory Protection:IF TLV EXCEEDED USE CARTRIDGE VAPOR MASK.
Ventilation:SUFFICIENT TO ENSURE LEL NOT ACHIEVED.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:PROTECT SKIN W/CLOTHING OR BARRIER CREAM.
Supplemental Safety and Health
NK

HCC:F2
Boiling Pt:B.P. Text:245 - 390F
Vapor Density:>AIR
Evaporation Rate & Reference:Percent Volatiles by Volume:74

Stability Indicator/Materials to Avoid:YES
ACIDS OR ALKALIES CAUSE VIOLENT REACTION.SSTRONG OXIDIZING MATERIALS
MOISTURE CAUSES HYDROGEN GAS BUILD-UP.
Stability Condition to Avoid:GAS BUILD-UP IS INDICATED BY BULGING CAN
OR LID.CONSULT MANUFACTURER IF THIS OCCURS.
Hazardous Decomposition Products:CABON MONOXIDE AND CARBON DIOXIDE ON
COMBUSTION.

Waste Disposal Methods:AS PER LOCAL & FEDERAL REGULATION FOR HAZARDOUS
MATERIAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.